Sep 24, 2014 at 07:13 PM CST
+ 1
|
|
---|---|
Posted by a private BulkLoads.com member.
|
Posted by a private BulkLoads.com member.
How many tons of hominy can I get on a short sided hopper have no experience with it
|
Replied on Thu, Sep 25, 2014 at 12:30 AM CST
|
|
---|---|
Posted by a private BulkLoads.com member.
|
Posted by a private BulkLoads.com member.
Have hauled many loads of hominy,would NEVER load in any size hopper. WF,belts or end DUMP only.
|
Replied on Thu, Sep 25, 2014 at 09:02 AM CST
|
|
---|---|
Posted by a private BulkLoads.com member.
|
Posted by a private BulkLoads.com member.
I used to haul hominy in a 72x96x48 Timpte with big hoppers and 28 ton was about the max. I would say you would be around that 20 to 22 ton range. It was always a good load with great pay and unloaded nicely.
|
Replied on Fri, Sep 26, 2014 at 09:48 AM CST
|
|
---|---|
Posted by a private BulkLoads.com member.
|
Posted by a private BulkLoads.com member.
20 - 22 T, must warn you that depending on the consistency of the hominy and the weather it can either drop easy or may take up to four hours to get out. If you are dropping on a pit it usually comes right out. If you are dropping on a farm auger then it will stick and take a lot longer. This load is better suited for belts and end dumps. Just letting you know in advance. We only use our hoppers for hominy and ddg in cooler weather, then all is ok. Other then that leave it for the belts and end dumps.
|