Dump Trucks needed from Baltimore to PA

Nov 03, 2016 at 05:17 PM CST
Posted by a private BulkLoads.com member.	Posted by a private BulkLoads.com member. Hey everybody, I'm excited about connecting with you all via the forum. I appreciate the insight I've been given by simply reading through the topics discussed on the sight. Now, down to business. I am in need of dump trucks in the Baltimore, MD area going out to 4 locations in PA: Aliquippa, PA Brackenridge, PA Kittanning, PA Butler, PA 35-40k pounds/run with load/unload times of about 45 min each. This would be a continuous deal and we would need 3-5 runs done per week. I would be able to provide 2-3 days advance notice. If you have the capacity and are interested, feel free to connect with me at 213.245.1468. Cheers and thanks for the help! -Mitchell

Nov 03, 2016 at 05:17 PM CST

Posted by a private BulkLoads.com member.

Hey everybody, I'm excited about connecting with you all via the forum. I appreciate the insight I've been given by simply reading through the topics discussed on the sight.

Now, down to business. I am in need of dump trucks in the Baltimore, MD area going out to 4 locations in PA:

Aliquippa, PA
Brackenridge, PA
Kittanning, PA
Butler, PA

35-40k pounds/run with load/unload times of about 45 min each.

This would be a continuous deal and we would need 3-5 runs done per week. I would be able to provide 2-3 days advance notice.

If you have the capacity and are interested, feel free to connect with me at 213.245.1468.

Cheers and thanks for the help!
-Mitchell

Replied on Fri, Nov 04, 2016 at 07:50 AM CST
Posted by a private BulkLoads.com member.	Posted by a private BulkLoads.com member. What is the product? Is it limited to dump truck only??

Replied on Fri, Nov 04, 2016 at 07:50 AM CST

Posted by a private BulkLoads.com member.

What is the product? Is it limited to dump truck only??

Replied on Fri, Nov 04, 2016 at 10:09 AM CST
Posted by a private BulkLoads.com member.	Posted by a private BulkLoads.com member. Quote: "What is the product? Is it limited to dump truck only??" Hey there, thanks for your inquiry. It's scrap metal, unfortunately due to the lack of bundling and load unloading procedures already in place it does have to be a dump truck.

Replied on Fri, Nov 04, 2016 at 10:09 AM CST

Posted by a private BulkLoads.com member.

Quote: "What is the product? Is it limited to dump truck only??"

Hey there, thanks for your inquiry. It's scrap metal, unfortunately due to the lack of bundling and load unloading procedures already in place it does have to be a dump truck.

Replied on Sat, Nov 05, 2016 at 08:29 AM CST
Posted by a private BulkLoads.com member.	Posted by a private BulkLoads.com member. Is it small scrap you can haul in a aluminum dump or do you need a steel trailer? What is the rate per ton or does it have a flat rate?

Replied on Sat, Nov 05, 2016 at 08:29 AM CST

Posted by a private BulkLoads.com member.

Is it small scrap you can haul in a aluminum dump or do you need a steel trailer?
What is the rate per ton or does it have a flat rate?

Replied on Wed, Nov 09, 2016 at 06:53 PM CST
Posted by a private BulkLoads.com member.	Posted by a private BulkLoads.com member. Quote: "Is it small scrap you can haul in a aluminum dump or do you need a steel trailer? What is the rate per ton or does it have a flat rate?" I apologize for the late reply, I appreciate you taking the time to respond. It is scrap stainless steel pieces (12-24" in length) and loose steel coils. I have operated on a tonnage rate as well as a flat rate, can be negotiated either way. Thanks again for your inquiry!

Replied on Wed, Nov 09, 2016 at 06:53 PM CST

Posted by a private BulkLoads.com member.

Quote: "Is it small scrap you can haul in a aluminum dump or do you need a steel trailer? What is the rate per ton or does it have a flat rate?"

I apologize for the late reply, I appreciate you taking the time to respond. It is scrap stainless steel pieces (12-24" in length) and loose steel coils. I have operated on a tonnage rate as well as a flat rate, can be negotiated either way. Thanks again for your inquiry!