Another Different Move.

Feb 27, 2016 at 08:13 AM CST + 1 - 1
Posted by a private BulkLoads.com member.	Posted by a private BulkLoads.com member. First off let me say that, yes i do know this is Bulkloads for bulk moving material. I am curious if anyone on this site also runs stepdecks or RGN's. I have two PIXALL BIG JACK's sitting in the Del Ray Florida area that need to go to the Buffalo NY area. I need 2 stepdecks or RGN's to move these machines along with their cutter heads. From what I have been told, the machine, when broken down to power unit and cutter head, will probably be oversize. The cutter head is 15 to 16 feet long and I would guess 6 to 8 feet wide. I am also told the power unit is about 30 feet long and about 13 feet tall and 11 feet wide. Weight we are guessing aroung 30000# Not sure about the weight on the cutter head. Using this as guidelines is there anyone out there that runs the type of equipment that would be needed to move this equipment. I also need to know what a rate would be + permit costs and escort costs if necessary. . You may contact me at 877-637-3330, 308-493-5330, 402-212-1842 (cell) or e mail me at [email protected]. Sorry if this sounds a little vague on details. I got the call on this only a short time ago and I haven't done a lot of research on this. I specialize in bulk hopper freight but this is for one of my really good customers and I would like to try to be able to take care of their needs. Any help or suggestions on this would be appreciated.

Feb 27, 2016 at 08:13 AM CST

+ 1 - 1

Posted by a private BulkLoads.com member.

First off let me say that, yes i do know this is Bulkloads for bulk moving material. I am curious if anyone on this site also runs stepdecks or RGN's. I have two PIXALL BIG JACK's sitting in the Del Ray Florida area that need to go to the Buffalo NY area. I need 2 stepdecks or RGN's to move these machines along with their cutter heads. From what I have been told, the machine, when broken down to power unit and cutter head, will probably be oversize. The cutter head is 15 to 16 feet long and I would guess 6 to 8 feet wide. I am also told the power unit is about 30 feet long and about 13 feet tall and 11 feet wide. Weight we are guessing aroung 30000# Not sure about the weight on the cutter head. Using this as guidelines is there anyone out there that runs the type of equipment that would be needed to move this equipment. I also need to know what a rate would be + permit costs and escort costs if necessary. . You may contact me at 877-637-3330, 308-493-5330, 402-212-1842 (cell) or e mail me at [email protected]. Sorry if this sounds a little vague on details. I got the call on this only a short time ago and I haven't done a lot of research on this. I specialize in bulk hopper freight but this is for one of my really good customers and I would like to try to be able to take care of their needs. Any help or suggestions on this would be appreciated.